What Should I Do If The Watch Buckle Is Loose?

When the watch buckle is used for a long time, it will be loose. It will not be swatch for wearing, and the long-wearing loose watch will be very insecure, so we need to adjust it if we find that the watch buckle is loose.

The strap buckle is loose. I went to repair the watch and said that I have to spend dozens of new ones. I feel that I can’t make a decision. I didn’t change it. Later I went home and studied it myself. I found that as long as the front ends of the buckles were slightly knocked down with the hoe, it was tight. !

If you find that your strap is loose, you can remove the strap yourself and refit the appropriate strap section. The straps are connected differently, so the method of disassembly is different. It is more common to use nails and screw rods. For high-end watches, the nails used (tire straps) are grooved, and at the same time, there is a sleeve. The corresponding position of the sleeve will also have grooves. The sleeve is made of elastic steel and two grooves. When you fall together, you can ensure that the straps are not studded in the future.

Watch buckle loose solution

1 knife to pick a higher pick.

2 Or go to the place of purchase to change.

3 Use your own needle-nosed pliers to adjust the link between the buckle and the strap.

4 new buy a strip, the strap of your watch size, please buy the strap to help change.

Watch buckle adjustment steps

  1. Unscrew the handle of the disconnector and return the ejector back to the flat shape
  2. Align the small stylus between the straps to be removed, screw the handle of the detacher and push out the small stylus
  3. Put the strap into the “slotted” of the disassembler (the ferrule steel bolt has two heads and one head is flat and has a word with a thin slit. There is a card position, so the sharp needle should be from the flat end, not From the top of a font type).
  4. 4, according to the size of the wrist to adjust to the appropriate length, then in the opposite direction of the arrow to put the hands back, put the strap, but pay attention to the watch must first determine the watch with the grain is not by the silk, but by the nail or hairpin Loaded. It can be OK from the smallmouth to the big mouth! The strap that is difficult to remove can only be done in less than a minute!

watch buckle common types

Watch folding buckle

In order to make up for the deficiency of the traditional pinhole strap, two-fold and three-fold straps were born. Their biggest advancement is to use the pinhole only as part of the fixed strap, the pinhole is used to fix the strap, and the other end is a metal folding clasp. The action of picking up the watch every day is only the folding clasp, which does not hurt at all. And around the strap and the hole.

Watch pin buckle

The watch pin buckle should be one of the most commonly used watch buckles. It is generally used for low and medium-grade belt watches. In terms of operation, the watch strap can be adjusted by itself.

Watch belt snap

Watch belt buckles are generally not used much, as its name suggests, mainly used for belt watches.

Watch button

The dark buckle of the watch is generally used for steel belt watches. When folded, it is integrated with the strap, which is very beautiful and therefore very popular.

How To Choose The Right Watch

There are many kinds of watches, many people are difficult to decide when they choose. I don’t know what kind of watch is right for you. So let’s see how to choose the right watch.

How to choose the right watch

  1. Choose a watch that suits your wrist, skin color, body shape, and frequent occasions. If you are bigger and stronger, you can’t choose a petite, delicate watch. It is best to choose a large surface, a chain link, and the geometrical structure of the grain is thicker. It looks more stylish and has a strong body shape suit watch for wearing a rough style watch. Smaller models should choose a smaller dial, thin section, away from the large surface, thick watch, beautiful people, should have a delicate watch to match it will look delicate and lively.

2, with your own overall to match, with the choice of clothes, glasses, handbags, the choice of watches must also be consistent with the overall dress.

3, according to the material of the strap to choose the color, if the strap is made of leather, then the strap color and the color of the shoes are consistent, this is a wise match.

4, consistent with their own temperament, whether you are outgoing or introverted, keen and sports or fashion simplicity, watches should be consistent with their own temperament, do not choose exaggerated large dial watch.

5, consistent with the environment, with different watches on different occasions, it is not appropriate to over-pursuit and shines

6, Choose the watch that suits you at the price. If you are just a commuter who squeezes the bus every day, and you don’t have so much economic support, don’t buy a watch with a good face. This will not give you the identity. It brings troubles in the life economy. You can choose the appearance, the movement, the quality, and the workmanship are all similar to the original replica watch. Although it is not a real genuine watch, it also brings good effects on the matching clothes. This is better than the price of the counter. , tangible, face to death, and overdraft hard support is much better.

Purchase watch considerations

When purchasing, you should choose the watch that suits you according to your actual income. Generally, you can purchase it with your monthly salary of two months.

Regular maintenance, the watch should not be deliberately put into the water test even if it is waterproof.

Basic knowledge to buy second-hand watches

In recent years, with the continuous improvement of the living standards of the people, the total import volume of watches in mainland China has increased year by year. Correspondingly, the second-hand watch market will also change with the fluctuation of the main market. The sale and purchase of second-hand watches have also become the focus of watch enthusiasts. What basic common sense do two watches need to know?

▶ Difference between two watches/refurbishment watch/display watch

Two watches: In a nutshell, as long as they are used, they are called second-hand watches. It includes private transfers, pawnshops, second-hand markets, etc… Some people say that there are second-hand watches, do you have three watches? Yes, from the second-hand market, it is difficult to understand its ins and outs, maybe three Hands, four hands, five hands, even dozens of hands. But no matter how many times these watches have been transferred, they are generally referred to as second-hand watches in the industry.

Refurbished form: First of all, we must treat the renovation correctly, and we must not regard it like a beast. Watches are daily necessities, worn on the hands of the sun, the sun, the rain, the bumps, and bumps, not long after the old. The old watch is worn by you, and once it is handed over to the second-hand line, there is no selling point for such a color. So there is a step to make it fresh, called renovation. In fact, it may not be handed over to the second-hand line. The vast majority of watch service points are to undertake renovation and polishing services. Maintenance and washing oil may also provide a full set of free-standing. There is no selling point for broken things, and everyone likes new things. It can also be seen that the refurbishment of the watch is like pumping weight loss and sheep placenta. As long as it is in an acceptable range, it is not the deep grinding that we say. The actual use is not only unaffected but also makes you wear a more face.

Display watch: Generally, the watches displayed in the watch shop window and the counter are displayed. Because they are put on hold for a long time or for people to try on, these watches may not have the film of the warehouse and may have slight scratches caused by display, display, and transportation. Some are placed on the counter for a long time and are illuminated by spotlights. Some of the dials must be yellowed, luminous failures, etc. But these watches are indeed unofficial and can be called unused products. Because of the small flaws and small marks on the watch, they may be cheaper than the real new watch. It should be noted that there is indeed a new product sold in the market after the watch is polished and refurbished. If you don’t see it, please help yourself!

▶ Accessories for two watches and their impact on sales

Watches are shipped from the factory, regardless of brand level, there will be accessories. What are the specifics? This depends on the brand level. Lower brands, mixed brands, general accessories are boxes, small pillows, brochures, paper sets, etc. … well-known middle section: box (or bucket), manual, warranty card, card model, store The date of sale, etc…. The well-known mid-section brand will also have an independent serial number. A brand of enough level, the general attachment is roughly the same: box, security card, manual, factory attached materials, etc…

The most important thing in the buying and selling process is the insurance card. Its value lies in “identifying identity.” What is identity? It is to prove that the watch is very safe and can be purchased with confidence. Of course, it is not that black cards are not a security card. For example, some people go to Macau to gamble, lose their way, and mortgage their watches, but they will not carry their insurance cards with them… Again, some people go abroad to see the new watches, but the price is beyond the advance. Do you want to sell the old watches directly for a change of funds, you can’t expect them to come back to China to take the insurance card…

If there are really no attachments, not only will the price of the second-hand watches be greatly reduced, but there may be cases where the police station is filed. Therefore, after starting the watch, it is necessary to carefully store the relevant accessories.

▶ Reasons for buying and selling second-hand watches

First of all, because the price is affordable. Some friends seem to be more taboo to talk about this point and think that there is no face. In fact, nothing is embarrassing. The price of most second-hand watches can be 50% lower than the price of the new watch. As long as there is no problem with the watch, saving money can achieve the goal and achieve the ideal, what can’t it be?! Some people say that playing the second-hand watch really knows how to play the watch, which is reasonable.

Secondly, some discontinued styles can only be considered in terms of second-hand, and there are similar antique watches. If you want to buy second-hand, you don’t necessarily buy it!

Finally, the principle of depreciation. Many people who buy second-hand watches will consider whether they will lose money in the future. To be sure, as long as the economy does not fluctuate greatly, not only will it not lose, but it may still earn in a few years.

Buying and selling second-hand watches is not a shameful thing. As long as you grasp the good road, you have some basic understanding of the common sense of watches. If you don’t plant your head, you will be less skilled. Second-hand watches are still very fun~ People who buy second-hand watches don’t have to be experts and experts, but you must have experts, experts, and people who know you to help you buy them with confidence and buy them.

How about the MG watch? How is the MG watch?

Based on the quality first, the dignitaries actively create and strive for the spirit of perfection. In order to satisfy the needs of consumers in the pursuit of success and noble taste, they have always passed on the classics in 133 spring and autumn, interpreting professional Swiss watchmaking culture and designing countless nobles. Timeless classic works. The so-called classic art design can last forever through the test of the times, and the fine work can achieve the top pursuit of quality. The real innovation is more resistant to the migration of time than the current trend. Like many watch companies with a long history, the time of the engravings, bearing in the brilliance, the MG is presented to the public.

In the spring of 1879, at a giant banquet, Cuthbert Keynes met Absalom Macpherson, who designed jewelry for the royal family. The two met at the same time. After two or three years of contact, the two were The watch technology has a common language, so the watchmaking factory was formally established in 1882, and the Manjaz watch company, Cuthbert Keynes and Abu Solon McPherson were registered with the authorities. (Absalom Macpherson) has cooperated with each other. Since its establishment, it has been instilling the spirit of quality first, actively creating and striving for perfection, and instilling in their friendship and mutual culture promoted The brand of Manjaz has grown and developed over the past five years. The Manjaz watch company has gradually gained favor from the industry, and its reputation has spread rapidly in the Swiss watch industry. With the technology of the famous watch, It is a mature classic, and every MG is designed to be a precious and timeless classic. It has become a treasure that the royal family members and noble gentlemen have led.

In 1884, it was an important beginning for the MG to the world. The watch core produced by the MG’s movement factory won the first place in the Neuchâtel Observatory’s precision timekeeping test competition. The award is a symbol of the global sales of watches and clocks. At the same time, the company’s watch products are a well-known watch badge, which has established a strong position in the Swiss watch industry.

In 1888, Cuthbert Keynes took 18 months of fine work and finally produced the first scale-carved shell, hand-wound, open-top pocket watch, so this precious and ancient combination The scale watch pocket watch La ēcaille officially came out. It was once a special timing tool for senior officers of the Spanish Navy.

In 1931, Manjaz was the first wristwatch with a constant-motivation core “La Auto Ma”.

Between 1940 and 1959, the Manjaz watch was awarded a certificate issued by Kew Teddington, the UK’s authoritative testing department, and the Neuchâtel Observatory in Switzerland.

In 1967, Esmond Keyes, the grandson of Keynes, graduated from the Paris Watch School and resolutely joined the Manjaz watch company. Since childhood, he has received a good education and baptism of the family’s fine traditions, plus talent. Although he first entered the field of watches, he fully demonstrated his ability and talent in watchmaking, so he soon became an excellent watch technician.

In 1978, after more than a decade of experience, Esmond Keyes officially took over the prestigious family business. Then, the ideals and ambitions of Esmond Keyes finally To be able to display, first move the factory from La Chaux-de-Fends to Solothurn, a province with abundant human resources and developed transportation. Adopt modern company management system and mechanized production methods to introduce cutting-edge Professional watchmaking technology and instruments, using the new division of labor system for assembly work, improve efficiency, skill, and quality, and produce watches with precise, accurate, high quality and reasonable price.

Esmond Keyes is a master of watchmaking on antique watches. Especially on antique pocket watches, he has inspired him a lot of creativity and can be flexibly implemented in his own works. The clock with its own name is engraved with the Latin word “Invenit Fecit” (invention and creation); on the other hand, Esmond Keyes is a successful entrepreneur, he is adhering to The family’s visionary and strategic tradition has been to expand the Far East sales market while consolidating the European and American markets. In a trade meeting in the Balsthal region, Esmond Keyes met Fluri Hubert, and the two quickly established a close relationship in the Far East market. Hong Kong, Japan, India, and Southeast Asia have established offices to focus on the local business development of the MG, and respond closely to market requirements.

The beauty of the quiet years, inheriting the classics of the centuries. After three generations of unremitting efforts, the Manjaz watch has always been the same, adhering to the spirit of quality first, actively creating, striving for perfection, constantly improving the watchmaking process, a group of outstanding MGs hand in hand Cooperate to work together to produce high-quality and high-level watches and clocks to meet the test of the new era.

In 1992, ARTAX WATCH LTD officially entered into a partnership with the Keyes Family and was officially commissioned by the Cairns family, Flori Hubert. With years of experience, Fluri Hubert led the MG to overcome challenges and create international The market, especially the market in the Far East, has achieved remarkable results.

As a traditional Swiss brand, MG is always maintaining the consistently high quality of the Swiss watch industry. In the face of the globalization trend of the world economy, the MG is constantly exploring and advancing, and gradually develops its own unique watchmaking culture. After taking office, Fluri Hubert carried out a certain degree of resource integration on the MG brand, from the traditional family management mode to the scientific production management, modern marketing planning mode, to meet the needs of the market for the majority of watch lovers bring a classic, high-quality Watch.

How to choose the right watch?

If you want to buy a watch and want to save money, it is not an easy task. It is even more difficult to buy a watch that suits you. So when we buy a watch, how should I choose the watch that suits me? Today I share some tips for buying a watch and I hope it will be useful to you.

Choose a suitable watch for one watch: look at the brand

The first direction of purchasing a value list is to find those that have passed the test of time, can represent the design and production process of the brand, and at the same time, not the popular classic models, most of which are the basic models of each brand. Evergreen, because the product development costs have long been shared by the previous consumers, so the price is relatively approachable.

Choose the right watch for the second skill: see the price

In fact, no matter what we buy, the first concern is basically the price. The same is true for buying a watch. Many people will think about what kind of price watch they want to buy. You must know that the watch has appeared in this world from the beginning. It is a symbol of identity. When the watch was not popular before, only the rich people have the status to be able to afford the watch. Although the watch has long been popular, the real good watch is not everyone. Can be bought, some watches can even be worth a house, I think that as an ordinary person wants to buy a watch that is neither too bad and in line with his own identity, you can use your monthly salary for two months to buy The most suitable, because if the watch you bring is too good, people will think that you are carrying a fake, if you bring it is true, if you accidentally rub it when you work, it will be distressing to die, so suitable The best is the one.

Pick watch tips

1, first look at the appearance

After purchasing the watch, the accuracy of the standard, in addition to the brand price, of course, it depends on whether the appearance is in line with their own aesthetics, whether there is a flaw. Observe whether the glass surface of the watch is smooth, transparent and scratched.

2, followed by the dial

Carefully observe whether the number on the dial surface is even (marked with diamonds), whether the mark is clear, and if there is a watch with a calendar display, you should also choose to rotate the watch knob to 12 o’clock to see if the date jumps.

3, look at the case

Next, turn the watch over to see if the case is scratched, whether the case marking is clear, whether it is tight with the body, and whether the seal is exposed.

4, look at the pointer

Adjust the watch knob to point to 3 o’clock, 6 o’clock and 12 o’clock respectively. Observe carefully whether the hour, minute and second hand are straight, whether there is a proper gap between the needle and the needle, the dial surface, and the glass surface, so as not to rub. Affect the accuracy.

Summary: The above is some of the tips and suggestions I have made to buy a watch that suits you. You can refer to it when you buy a watch.